6
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
FZ3 User's Manual
Controlling/Outputting through Serial Communication (Non-procedure)
165
Important
●
During parallel continuous measurement and when the STEP signal is input continuously, do not perform
switching of the scene group. When this is performed, set "Unchecked" in "Save scene group on switch scene"
in either of the settings items below.
●
Switch Scene Group window Reference:
●
[Measure setting] in the [Measure] menu Reference:
Setting Conditions Related to Operation during Measurement (p.108)
SCNLOAD
Reads scene data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Scene No.
Specifies the scene No. to be read (0 to 31)
File name of
scene data
Specifies the name of the file to be read with a definite path.
Only files that are under the following systems and have an "SCN" extension can be read.
- USBDisk
- RAMDisk
Important
●
If the specified file name already exists, this existing file will be overwritten
●
Do not turn off power to the controller until there is a response.
(Example)
When "LABEL.SCN" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to the controller as scene 2.
<Command>
Acesst 1.0 6251194
