6
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
168
Controlling/Outputting through Serial Communication (Non-procedure)
FZ3 User's Manual
(Example)
When "LABEL.SGP" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to scene group 3
<Command>
<Response>
Note
●
For the USB memory drive, see Reference:
About USB Drive Names (p.94) .
SGRSAVE
Saves scene group data.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Scene group
No.
Specifies the scene group No. to save (0 to 31).
Save
destination
Specifies the save destination and file name during saving with a definite path.
Save destinations include directories under the following systems.Be sure to attach an "SGP"
extension to the file name.
- USBDisk
- RAMDisk
Important
●
If the specified file name already exists, this existing file will be overwritten
●
Do not turn off power to the controller until there is a response.
Acesst 1.0 6251194