manualshive.com logo in svg

Omron FH-2 Series, Hardware Setup Manual, Page: 3 / 244

Share
Download
Omron FH-2 Series Hardware Setup Manual Download Page 3

Introduction

Thank you for purchasing the FH Series.
This manual contains information that is necessary to use the FH Series.
Please read this manual and make sure you understand the functionality and performance of the FH
Series before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.

Intended Audience

This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.

Applicable Products

This manual covers the following products.
• FH-1

£££

• FH-1

£££

-

££

• FH-2

£££

• FH-2

£££

-

££

• FH-3

£££

• FH-3

£££

-

££

• FH-5

£££

• FH-5

£££

-

££

• FH-L

£££

• FH-L

£££

-

££

Part of the specifications and restrictions are given in other manuals. Refer to Relevant Manuals on 

Relevant Manuals

 on page 2 and 

Related Manuals

 on page 26.

Introduction

1

FH Series Vision System Hardware Setup Manual (Z366-E1)

Summary of Contents for FH-2 Series





















































































































































































































































Reviews:

No comments