manualshive.com logo in svg

Omron FH-2 Series, Hardware Setup Manual, Page: 157 / 244

Share
Download
Omron FH-2 Series Hardware Setup Manual Download Page 157

Precautions for Correct Use

Turning OFF the Power

When a message is displayed indicating that a task is in progress, do not turn OFF the power.
Doing so causes the data in the memory to be corrupted, resulting in the product not operating
properly upon the next start-up.
Do not turn OFF during saving data to Sensor Controller.
When turns OFF, conform the followings proceedings have completed. and then operate again.
- When saves using Sensor Controller: Confirm the save processing is completed and next op-
eration is possible.
- When saves using communication command: Intended command is completed. BUSY signal
is turned OFF.

Maintenance

Turn OFF the power and ensure the safety before maintenance.

5-1-2

FH-2000/FH-5000 Series

Precautions for Safe Use

• Check the following again before turning on the power.

Are the voltage value and polarity of the power supply that is provided to the encoder cable
(ENC0 VDD/GND, ENC1 VDD/GND) correct? (5 VDC)

5 Setup and Wiring

5-3

FH Series Vision System Hardware Setup Manual (Z366-E1)

5-1 When turning ON and OFF

5

5-1-2

 FH-2000/FH-5000 Series

Summary of Contents for FH-2 Series





















































































































































































































































Reviews:

No comments