Omron FH-2 Series, Hardware Setup Manual, Page: 200 / 244

l
XW2Z-S013-
£
Unfused part
Cable mark
L *1
1
2
33
34
(70) (70) (15) (30)
Fused part
*1. Cable is available in 2 m/5 m.
Pin Layout
Terminal assignments and signal names should be set according to the FH Sensor Controller's opera-
tion mode settings. Verify that the wiring conforms to that.
Additional Information
For Operation Mode, refer to the Setting the Operation Mode in the Vision Sensor FH/FHV
Series User’s Manual (Cat. No. Z365) .
No. I/O
XW2Z-
S013-
£
Wire col-
or
XW2R-
£
34GD-T
Connector-
Terminal
Block Con-
version
Units, Gen-
eral-purpose
devices
Signal name
1-line mode
2-line ran-
dom mode
3- to 4-line
random
mode
5- to 8-line
random
mode
CN1
1
- Red A1 COMIN0
2 - Gray B1 COMIN1
3 - Gray A2 Vacant
4 IN Gray B2 STEP0/
ENC-
TRIG_Z0
*1
STEP0/
ENC-
TRIG_Z0
*2
STEP0 STEP0
5 IN Green A3
Not used
*3
STEP1/
ENC-
TRIG_Z1
*2
STEP1 STEP1
6 I/O Interface
6-6
FH Series Vision System Hardware Setup Manual (Z366-E1)