Omron FH-2 Series, Hardware Setup Manual, Page: 176 / 244

5-4-3
FH-L Series
Precautions for Safe Use
• Monitor connector: Please insert the connector perpendicularly so that the connector resin
part and pin are not rubbing against each other. Damaged pin may cause contact failure due
to generation and invasion of resin powder.
• Do not ground the positive terminal of the 24 VDC power supply when connecting the Sensor
Controller and FH-MT12 using a USB cable. The internal circuits may cause a short-circuit
and result in malfunction.
Precautions for Correct Use
When connecting the sensor controller and monitor with a switcher and splitter
Do not use devices that may require re-recognition of the monitor by the Sensor Controller
when a switching operation was performed. If such re-recognition processing happens at
switching operation, it may cause measurement time to be longer.
When fix the DVI connector
If difficult to fix the bilateral screws of DVI connector, once loosen these. Then retry to fix, again.
5 Setup and Wiring
5-22
FH Series Vision System Hardware Setup Manual (Z366-E1)