1 Features and System Configuration
1-20
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
Precautions for Correct Use
Precautions for Correct Use
Slave communications must be disabled prior to area allocation when you use fixed allocations
or allocations set in the device variable for CJ-series Unit, and the settings must be read to the
Unit when slave communications are enabled.
Allocations will not be valid if slave communications are enabled during area allocation.
Create an I/O table, and switch the CPU Unit to PROGRAM mode.
Change "
*_Sw2SlavEnblCmd
" (Slave Enable Switch) to TRUE from the Sysmac Studio.
Note: Execute this only when slave communications are turned OFF. (If the Master Enable Switch is turned ON when master
communications are enabled, a Unit error will occur and a C2 error will be displayed on the 7-segment indicator on the front panel.)
Define user-defined variables in the area to which I/O data is allocated.
Switch the CPU Unit to RUN mode.
Slave remote I/O communications will begin.
Fixed Allocations
Change "
*_Sw2SlavFixAloc1Cmd
"
to "
*_SlavFixAloc3Cmd
"
(Slave Fixed Allocation
Setting 1 to 3 Switches)
to TRUE from the Sysmac Studio.
User-set Allocations Using Device Variables for
CJ-series Unit
User-set Allocations Using CX-Integrator
(Refer to the
CX-Integrator manual
)
Input data in advance into
"
*_SlavAlocTblCfg[0]
"
to "
*_SlavAlocTblCfg[5]
"
(Slave User-set Allocations
Setup Table).
Create a device parameter file
from the CX-Integrator. (Enable
Slave function in CJ1W-DRM21
properties at this time.) Then
download the file to the
DeviceNet Unit.
Change "*
_Sw2SlavAlocCmd
"
(Slave User Allocations Switch)
to TRUE from the Sysmac Studio.
Change "
*_Sw2SlavDsblCmd
" (Slave Stop
Switch) to TRUE from the Sysmac Studio.
Check to see if the slave function is disabled.
<Check "
*_SlavEnblSta
" (Slave Function Enabled)
from the Sysmac Studio.>
TRUE (Slave function enabled)
FALSE
(Slave function disabled)
Sla
ve
function
disab
led
Pre
oper
ations
Sla
ve
function
enab
led
Area allocations
Area allocations
)
Summary of Contents for CJ1W-DRM21
Page 12: ...Manual Structure 10 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 ...
Page 42: ...Revision History 40 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 ...
Page 345: ...Index 1 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 I Index ...
Page 349: ......