30
Sec
tion 2
Set
ting
Read
ing
Con
d
it
ions
by
T
eac
hing
V400-F050/250/350
User’s Manual
Section 2
Changing Reading Conditions
Setting Reading Conditions by Teaching
Teaching uses one sample to read it and sets a reading condition based on the results.
1.
Switch to the setting mode.
Hold down the center button for more than two seconds to
activate the setting mode.
“Changing Settings” p.24
2.
Select [Bank Setting] from [Setting Menu].
The [Bank Setting] screen will appear.
3.
From [Bank #00] to [Bank #09], select the
bank to which the teaching results are to be
saved.
The contents of the selected bank are displayed in the
right area of the screen.
The edit menu will be displayed.
4.
Select [Teaching].
The [Teaching] screen will appear and the screen brightness is adjusted automatically.
STILL/LIVE MODE
TRIG
UP
EXECUTE DOWN
Hold down for more
than two seconds.
[Bank #00] contains the reading condition set by
“Simple Teaching”.
Guidance
Displays the operating method in
brief.
Menu name
Displays the name of the currently
selected menu and the name of the
upper hierarchical level.
Exposure time
Displays the currently set exposure
time.
Summary of Contents for 2D CODE READER
Page 1: ...USER S MANUAL 2D Code Reader V400 F050 250 350 Cat No Z242 E1 03...
Page 13: ...12 Introduction Contents V400 F050 250 350 User s Manual Introduction MEMO...
Page 85: ...84 Section 6 Troubleshooting V400 F050 250 350 User s Manual Section 6 Troubleshooting MEMO...
