31
V400-F050/250/350
User’s Manual
Sec
tion 2
Set
ting
Read
ing
Con
d
it
ions
by
T
eac
hing
Section 2
Changing Reading Conditions
5.
Adjust the brightness.
Check the automatically adjusted brightness.
To change the brightness, press the right and left buttons.
6.
Confirm the brightness.
Press the center button.
Teaching will start.
When teaching is complete, the teaching results are
displayed.
7.
Checking the results.
Check the teaching results.
To change the reading condition, select the condition item
to be changed. For details, refer to “Setting Reading
Conditions Manually” p.32.
8.
Confirm the reading condition.
Select [OK] to confirm the reading condition. This will
bring you to the operation menu.
If you select [Cancel], the operation menu will reappear
without reflecting the teaching results.
9.
Save the settings.
Select [Save] from [Setting Menu] to save the changes
you have made to the reading condition.
p.56
The brightness is adjusted based on the exposure
time. The longer the exposure time, the brighter
the image but the image is easily blurred if the work
piece is not stationary.
p.91
STILL/LIVE MODE
TRIG
UP
EXECUTE DOWN
Press
STILL/LIVE MODE
TRIG
UP
EXECUTE DOWN
Press
Summary of Contents for 2D CODE READER
Page 1: ...USER S MANUAL 2D Code Reader V400 F050 250 350 Cat No Z242 E1 03...
Page 13: ...12 Introduction Contents V400 F050 250 350 User s Manual Introduction MEMO...
Page 85: ...84 Section 6 Troubleshooting V400 F050 250 350 User s Manual Section 6 Troubleshooting MEMO...
