![background image](http://html1.mh-extra.com/html/omega/ome-et-7000-series/ome-et-7000-series_user-manual_4010240116.webp)
Page: 111
Modbus Address for Calibration
Register
Points
Description
Access
Type
00830
1
Enable/Disable Calibration
0=Disabled
1=Enabled
R/W
00831
1
Zero calibration command of ch0, 1 = run
W (Pulse)
00832
1
Span calibration command of ch0, 1 = run
W (Pulse)
Note:
When calibrating current type (i.e. type 06, 07 and 1A), the jumper of the
corresponding channel should be short. Refer to the link for details.
ftp://ftp.omega.com/public/DASgroup/products/OME-ET-7000_OME-PET-7
000/
4.2
Clicking the “Connection > Connect” in menu bar and fill out the
OME-ET-7
017’s IP address to set TCP Connection.
4.3 Double-
click on address 830 to set it as “ON”. (Enable Calibration)
Summary of Contents for OME-ET-7000 Series
