![background image](http://html1.mh-extra.com/html/omega/cn8200-series/cn8200-series_user-manual_737605004.webp)
In addition to presenting a potential fire hazard, high
voltage and high temperature can damage equipment
and cause severe injury or death. When installing or using
this instrument, follow all instructions carefully and use
approved safety controls. Electrical connections and wiring
should be performed only by suitably trained personnel.
Do not locate this instrument where it is subject to excessive
shock, vibration, dirt, moisture, oil, or other liquids. The safe
operating temperature range for this unit is 32°F to 140°F
(0°C to 60°C).
This unit has been tested and found to be compliant with
“NEMA Type 4X Enclosure - For Indoor Use Only.” When
properly installed, this controller will maintain the integrity of
a NEMA enclosure and remain “Watertight.” This rating is
only applicable when the controller is properly installed into a
suitably rated NEMA Type 4X housing.
Safety Warning
Table of
Contents
Installation
1
Dimensions and Mounting
2
Wiring
3
Output Types
6
Operation
7
Front Panel Controls
7
Power On
8
Security Levels
8
Operating Modes
10
Menu System Overview
11
Initial Setup Sequence
15
Parameter/Menu Descriptions
17
Input Menu
18
Temperature Input
20
Process (Linear) Input
20
Display Menu
20
Output Menu
21
PID Output and Control Menus
22
On/Off Output and Control Menus
23
Alarm Outputs
25
Autotune Damping
26
Ramp and Soak Menu
26
Supervisor Menu
28
Calibration Menu
29
Options Menu
29
AutoTuning
30
Manual Tuning
32
Error Codes
33
Technical Specifications
34
Ordering Codes
37
Recalibration Procedures
38
Quick–Helps
39
Glossary
42
Quick Setup Instructions
44
For information and
operating instructions
related to installed
options and digital
communications, refer
to the Series CN8200
options and communica-
tions manual supplied
with your controller.