21
Output Menu
The first parameter that needs to be set in the Output Menu is the
Output Type
. There are three possible
Output Type
configurations:
PID, On/Off, Alarm, or Off.
(If you are not sure which Output Type is
best for your particular application, refer to the Glossary for an
explanation of Output Types.)
The remaining menu parameters in the
Output Menu will change, depending on the
Output Type
selected.
The Control Menu will also change, depending on the
Output Type
selected. If you ordered two outputs, you can select two different
Output Types
. After setting your
Output Type
, refer to the corre-
sponding sections below for the remaining Output Menu parameters.
For simplification purposes, the following sections assume the same
Output Type
for both outputs. If you selected different
Output Types
,
refer to both of those sections.
Output Type
Display Parameter
Selection
Output 1 Type
Output 2 Type
20
Temperature Input Type
Display Parameter
Selection
Bias
-100 to 100
Lower Setpoint Limit
Span of Sensor
Upper Setpoint Limit
Span of Sensor
Filtering
0.1-10.0 sec.
Linear Input Type
Display Parameter
Selection
Bias
-100 to 100
Low Scale
-1999 to 9999
High Scale
-1999 to 9999
Lower Setpoint Limit
Span of Sensor
Upper Setpoint Limit
Span of Sensor
Filtering
0.1-10.0 sec.
Input Menu
Display Menu
Display Parameter
Selection
Decimal Position
0-3 Linear Inputs
0-1 TC/RTD
Filter
0.1-10.0 sec
Units*
Fahrenheit
Celsius
Kelvin
*NOTE:
Does not appear for linear inputs.
Blanking
,
0-9999 sec
