Omega CL3001, User Manual, Page: 64 / 104

Status Commands
Command Description
FAULT? Returns the most recent error code in the CL3001 error
queue, and then removes that error code from the
queue.
10.3 Error Code Listing
Error Number Message Class Description
1 DDE Error queue overflow.
100 EXE OPER or STBY was received when the
CL3001 is in measure mode or thermocouple
source mode.
101 CME A non-numeric entry was received in a field
that should contain a numeric entry.
102 EXE The numeric field exceeds 10 characters.
103 CME Invalid units name or prefix.
104 EXE An attempt to enter RTD source mode was
made when SPRT is selected, or to select
SPRT when RTD source mode is selected.
105 EXE Entry is above upper limit for the selected out-
put range.
106 EXE Entry is below lower limit for the selected out-
put range.
108 CME A required command parameter was missing.
109 CME An invalid TC_MEAS or RTD_MEAS unit
parameter (not CEL or FAR) was received, or
an invalid PRES_UNIT or ISO_PRES_UNIT
parameter was received.
110 CME An invalid RANGELCK parameter was
received.
111 EXE RANGELCK ON was received when the
CL3001 is not in Volts mode.
112 CME An invalid RTD_TYPE parameter was
received.
113 CME An invalid TC_REF parameter was received.
114 CME An invalid TSENS_TYPE parameter was
received.
60