Omega Engineering OMB-DBK-34A, User Manual

Page: 68 / 250

Setting Internal Clock Speed to 100 kHz
This section applies to DaqView users who are using one or more of the following DBK options in
conjunction with a DaqBook/2000 Series Device, DaqBoard/2000, DaqBoard/2001, DaqBoard/2005 or a
compact PCI counterpart of these boards; i.e., cPCI DaqBoard/2000c, cPCI DaqBoard/2001c, and cPCI
DaqBoard/2005c.
DBKs impacted at the time of this writing are: DBK12, DBK13, DBK15, DBK19, DBK52, DBK53, and
DBK54.
Note : In DaqView’s Configure Systems Hardware window, after selecting DBK12, DBK13, DBK15,
DBK19, DBK52, DBK53, or DBK54 a message box should prompt you to select an internal clock
speed of 100 kHz.
A Message Box Regarding Specific DBKs and the 100 kHz Internal Clock Speed Setting
To select an “Internal Clock Speed” of 100 kHz:
1. Select the Acquisition Setup tab on DaqView’s main window.
2. On the lower left corner of the window, under Scan Configuration ,
click the Preferences button.
The
Advanced Options window will appear (following figure).
Note : The Advanced Options box can also be accessed from the
Windows pull-down menu.
3. Under “Internal Clock Speed,”
select
100 kHz .
4. Click the OK button to return to
DaqView’s main window.
The internal clock is now set for
100 kHz.
3-8 DBK Setup in DaqView
968194
DBK Option Cards and Modules User’s Manual