DBK Option Cards and Module
879895
DBK16, pg. 31
Periodic Calibration Without Trimpots
Once the trimpots have been adjusted during initial installation, periodic trimming can be performed
through LogView’s 2-Point software calibration. The LogView procedure does not require the use of
trimmpots and should not be confused with the 2-point method discussed in this section of the manual.
Refer to the LogView chapter in the LogBook User’s Manual for information regarding 2-point calibration
via software.
DBK16 – Specifications
Name/Function: 2-Channel Strain-Gage Input Card
Input Connectors
: Screw terminals for signal connections
Output Connector
: DB37 male, mates with P1 using CA-37-x cable
Number of Channels
: 2
Excitation Voltage Range
: 1.50 to 10.50 VDC @ 50 mA (on-board adjustment for external source)
Gain Range
: ×100-1250
Types of Bridges Accommodated
:
Full Bridge, Kelvin Excitation (6-wire)
Full Bridge (4-wire)
Half Bridge (3-wire)
Quarter Bridge (2-wire)
Bridge Resistors
: On-board provisions for 4 bridge-completion resistors per channel.
Type Input
: Differential DC
Input Impedance
: 100 M
Ω
(in parallel with 150 pF)
CMRR
: 115 dB
Excitation Voltage Source
: External 13-18 VDC @ 50 mA/circuit
Excitation Current Output
: 50 mA max, current limited at 60 mA
Excitation Sensing
: Local or Remote
Excitation Regulation
:
Line Regulation: 0.025%
Load Regulation: 0.05%
Reference Voltages
: 2.500 VDC
Reference Accuracy: 0.05%
Reference Drift: 3 ppm/ºC
Gain Calibration Reference
: 5.00 mVDC
Reference Accuracy: 0.2%
Reference Drift: 20 ppm/ºC
Committed instrumentation amplifier [for each section], with a gain adjust
from ×100 to ×1250 via externally accessed 15-turn trimpot.
Gain Accuracy
: 0.5%
Gain Drift
: 50 ppm/ºC
Input Offset
: 100 µV max
Offset Drift
: 4 µV/ºC
Output Offset
: 20 µV
Offset Drift
: 200 µV/ºC
Offset Adjustment
: 0-100% of range, 0-5.00 VDC (15-Turn trimpot)
Full-Scale Sensitivity Range
:
@ 5.00 VDC Excitation: 0.8 to 10 mV/V
@ 10.00 VDC Excitation: 0.4 to 5 mV/V
Scaling Amplifier Gain Range
: ×1 to ×10 (15-Turn trimpot)
Low-Pass Filter
: 3 pole Butterworth, User By-Passable;
-9dB @ User-set Corner Frequency
Summary of Contents for OMB-DBK-34A
