66
6 Stereo measurement procedures (RX (stereo measurement function) only)
The measurement method selection screen is displayed immediately after starting stereo measure-
ment, or if "METHOD" is selected in the measurement menu screen.
The following four measurement methods are available.
This mode allows for measuring the distance between measurement points.
Place the cursor on each extremity of the measurement area you want to measure and press the
[MEAS/ENTER] joystick to specify the measurement points.
This mode allows for measuring the distance from a measurement point to the reference line de-
fined by two reference points.
Measurement method types
Distance
Point to line
Distance
Point to line
This mode allows for measuring the distance from a measurement point to the reference plane de-
fined by three reference points. It indicates depth and height.
Height is indicated by a positive value and depth is indicated by a negative value.
Depth
Depth
Distance between
measurement points
Measurement point
Measurement
point
Perpendicular
distance
Measurement point
Reference point
Reference line
Depth or height
Measurement point
Reference point
Reference point
Reference point
Reference
plane
