Olympus ESG-400 Instructions Manual Download Page 29

Page: 29 / 160

Chapter 2 Nomenclature and Functions

W7.091.601

ELECTROSURGICAL GENERATOR ESG-400

2.7 Mode screen

Mode button

These buttons allow the mode selection for a corresponding output socket
as shown in the title line. If a selection is already activated, this is
indicated by a gray button. If no mode shall be selected, press the “Off
button.”

Return button

Press this button to return to the “Set screen.”

2.8 Footswitch with two pedals

The footswitch with two pedals (Olympus REF: WB50402W) is included in
delivery.

Cut pedal (yellow color)

This pedal is used to activate the selected cutting mode.

Coagulation pedal (blue color)

This pedal is used to activate the selected coagulation mode.

Footswitch plug

Connects the footswitch with the electrosurgical generator

on the rear

panel.

Summary of Contents for ESG-400

































































































































































Search results

Summary of Contents for ESG-400

Reviews:

Olympus ESG-400, Instructions Manual, Page: 29 / 160

Search results

Summary of Contents for ESG-400

Reviews: