Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 34
Thick butt of siding
Caulk
gap.
Trim dado sits
in flange.
T
rim dado
Caulk
gap.
Window
frame.
Siding Butt
Screw insert into
bottom (thick)
part of siding.
86.
To reduce possible water from penetrating into the window
cavity, caulk gap on both sides of window opening prior to installing
Window Insert.
Position insert in cavity and screw with
6 - 1 1/4”
Screws
. On sides, make sure to screw insert into the thick butt of
the siding only.
86a.
Once Insert is attached,
caulk the “triangular gap”
between the Insert’s outside
flange and the siding. Also put
a bead of caulking horizontally
at top of window where the
flange and siding meet. This
additional caulking will also will
reduce the chances of moisture
entering into your shed.
87.
Position
Window Trim
around window doing a dry run first and attach with
4 - 1 1/2” Finishing Nails
per piece. Window trim has a small dado on reverse
face. Outside flange of window will roughly sit in the dado to give a better fit.
