Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 29
73.
Attach
Door Handle, Exterior Barrel Bolt
and
Interior Barrel Bolt
to door. Handle is
positioned on top door, Barrel Bolt on bottom door and Interior Barrel Bolt (silver) to top door stud.
Attach Black Barrel Bolt as illustrated above with 3/4” Black Screws. Note how female part of Barrel
Bolt is positioned higher than male. Do a dry run first to position Barrel Bolt correctly.
Important:
Drill
pilot holes with 1/8” drill bit prior to securing with screws to prevent wood splitting.
Temporarily positioned
Interior Door Stop to help
align Interior Barrel Bolt.
72.
Place the Top Dutch Door Panel into place
and gap top and bottom trims on the outside
about 1/8” apart. On the inside, horizontal door
frames should be about 1/4” apart. Use a shim
once again to help you. Attach hinges to trim
with 2” black headed screws provided.
Slight gap.Top Trim over-
laps bottom trim to prevent
water from getting in.
Bottom Skirting
70.
Attach Door Hinges to
Top
and
Bottom Dutch Door
sections. Top Door has trim overhanging
door at bottom while bottom door has trim recessed slightly. Hinges should be centered on door trim
with barrel nudged to end of trim. Use 2” & 3/4” black headed screws as shown above.
71.
Place Bottom Dutch Door panel into position.
Gap 3/8” on bottom, evenly space on sides, and
attach hinge to doorway seam trim with 2” black
headed screws. Use shim to help keep the door
evenly spaced on bottom. One of the extra roof
shingles (see parts list) can be used.
Bottom Door
3/8” gap at bottom.
Evenly spaced on
sides.
3/4” screw
Doorway Seam
T
rim
2” Black
Screws
Top and Bottom
Hinges centered
on door trim.
Top Door Trim
Bottom Door Trim
Middle Hinges
centered on trims.
2“ Screws
Top Door
Bottom Door
1/4” gap on
inside.
