24.
Locate and position an
Angled Wall Extendor
on the rear wall of Sunshed. Align once again so
2x3 frame lines up with previously installed Wall Extendor and regular wall panel. When correctly in
place, secure with 5 to 6 - 2 1/2” screws.
25.
Align and attach remaining Wall Extendors as per
Step 23-24.
Note:
Wall Extendors are not
required for the double window wall side.
26.
Locate
Rear Top Plate
(3/4” x 2 1/2” x 73 3/4”) and position on wall flush to inside wall framing.
Align so angle cut on 33 3/4 degree end is facing the solid wall side and 22 1/2 degree end is facing
double window wall side.
Important: See Step 27
for Top Plate Angle alignment.
Rear T
op Plate
33 3/4 degree Top Plate end
flush with solid wall framing
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 11
