Operating manual
for the user
EPANA 6 kW
EN
“OPERATING MODES” display
Manua
l
Auto
Operation mode
Fig. 3.19 Touch control panel – Operating mode
MANUAL operating mode
Manua
l
Auto
Operation mode
Fig. 3.20 Touch control panel – Manual operating mode
As soon as this operating mode has been selected, operation of the
pellet fireplace is possible with no further settings.
To do this, select the desired output stage and start heating opera-
tion with the “ON/OFF button”.
In “Manual” operating mode, the pellet fireplace heats at the preset
output stage in continuous operation until heating operation is
ended using the ON/OFF button.
Attention: saved switching times are only taken into consideration
in automatic mode.
The output stage can be set to 1-5 at any time:
ū Output stage 1 corresponds to the partial heat output
ū Output stage 5 corresponds to the nominal heat output
ū Factory setting: 4
AUTOMATIC operating mode
Manua
l
Auto
Operation mode
Fig. 3.21 Touch control panel – Manual operating mode
In “AUTOMATIC” operating mode, the pellet fireplace heats during
the preset switching times depending on the room temperature
selected. The preset room temperature can be changed at any time
during heating operation. The temperature change is only appli-
cable until the next switching time change if room temperatures
are saved for the switching times. If no switching times are saved,
then the pellet fireplace constantly heats to the desired room
temperature.
“LANGUAGE SETTINGS” display
Anzeige auf Deutsch
Language in english
Affichage en francais
Fig. 3.22 Touch control panel – Language settings
Selecting the appropriate language changes what is shown on the
display.
We reserve the right to make technical changes
49
