OKIDATA OF2200, Service Manual

Page: 235 / 410

Page: 141
Service Guide OF2200/2400/2600
Chapter 3 Disassembly & Maintenance
3.2.23 Motor Assembly, Resist Motor, and Main Motor
1. Perform the procedure 3.2.20 .
2. Remove the five screws (A), then remove the DFCU bracket.
3. Press upward on the two latches, while removing the motor assembly.
4. Disconnect the two cables.
5. Remove the motor assembly.
6. Remove the two idle gears and the reduction gear from the motor assembly.
7. Remove the four screws (B).
8. Remove the resist motor and main motor from the motor assembly.
NOTE :
When lubricating, refer to Module 3.5 of this Service Handbook.
P/N N/A Screw B.2.06
P/N 51225701 Gear: Stepper Motor Idle RSPL
B.2.06
P/N 51229301 Gear: Reduction RSPL B.2.06
P/N 51709901 Bracket: Motor B.2.06
P/N 51710501 Bracket: DFCU B.2.11
P/N 56511302 Motor: Registration Stepper RSPL B.2.06
P/N 56511303 Motor: Main Stepper RSPL B.2.06