OKIDATA OF2200, Service Manual

Page: 144 / 410

21A5 Received signal other than the desired signal in response to sending
TCF
21B0 Transmitter tried to perform Confidential Transmission but the remote
receiver is not capable of Confidential Reception
21B1 Transmitter tried to transmit by Broadcast Initiate Function but the
remote fax is not capable of Broadcast
21C0 In Closed Network Setting TSI/CIG/CST is either not received or if
received it is not authorized
22A6 Tried to perform Polling Reception but could not communicate
because the remote fax is G2
22B0 Tried to perform Confidential Transmission but could not
communicate because the remote fax is G2
22B1 Tried to perform Relay Broadcast Initiate but could not communicate
because the remote fax is G2
22B2 Tried to perform Broadcast but could not communicate because the
remote fax is G2
29B1 Confidential Reception was specified by transmitter in Phase B but the
amount of available memory was insufficient
29B6 In Confidential Reception the mail box specified by the transmitter is
not set up and open
39A0 The number of continuous-error lines have exceeded the specified
limit
39A1 The number of random-error lines have exceeded the specified limit
39B0 Memory Overflow has occurred while receiving in memory
39B1 Memory Overflow occurred during Confidential Reception
39C0 Decoder hardware error. (Cannot reproduce picture)
39C1 Decoder hardware error. (Cannot detect end of picture)
41A0 There was no response to the post command in three attempts.
41A3 RTN received in response to the post command
41A6 Received a signal other than the desired signal in response to the post
command
41A9 Fall-back in Phase C is not possible
41AA Received PIN for the post command
41C8 T5 time out
41CC Received a signal other than the desired signal in response to RNR
41CD Command not received in response to RNR