OKIDATA OF2200, Service Manual

Page: 239 / 410

Page: 143
Service Guide OF2200/2400/2600
Chapter 3 Disassembly & Maintenance
3.2.25 Registration Roller, Sensor Plates, Damper Cover Arm and Gear
1. Perform procedures
3.2.20,
3.2.24.
2. Detach the one-way clutch gear.
3. Remove the resist roller.
4. Detach the one-way clutch gear and bearing.
5. Remove the hopping roller.
6. Each sensor plate has two hooks. Release the hooks and remove the toner sensor plate, the three
inlet sensor plates, and the outlet sensor plate.
7. Remove the mounting screw, then remove the damper arm. Detach the damper gear.
8. Remove the two idle gears.
CAUTION:
When lubricating, refer to Module 3.5 of this Service Handbook.
Do NOT lubricate the sensor plates.
P/N 50219601 Assembly: Hopping Roller 2200 RSPL B.2.06
Includes the items listed below.
P/N N/A Shaft: Hopping Roller B.2.06
P/N N/A Rubber: Hopping Roller B.2.06
P/N 50405501 Sensor: Toner RSPL B.2.06
P/N 50407001 Roller: Registration (F) RSPL B.2.06
P/N 51010701 Plate: Sensor (Inlet) RSPL B.2.06
P/N 51010801 Plate: Sensor (Outlet) RSPL B.2.06
P/N 51011401 Plate: Paper Supply Sensor RSPL B.2.09
P/N 51011501 Plate: Cassette Sensor RSPL B.2.09
P/N 51228901 Gear: Hopping Roller Clutch RSPL
B.2.06
P/N 51229401 Gear: Stacker Cover Damper RSPL B.2.06