OKIDATA OF2200, Service Manual

Page: 173 / 410

ON: The fax unit receives all messages in
memory reception mode. Print starts at the
end of reception and after completion of fuser
preheat.
OFF: Power Save Mode disabled.
52 Calendar Format Selects the format of the date displayed on the
operator panel and printed on reports.
Settings: <_><_>D/M/Y Day Month Year
<_><_>Y/M/D Year Month Day
<_><~><~>M/D/Y Month Day Year M/D/Y
53 Continuous Polling RX Enables (ON) or disables (OFF) continuous
polling rx. During continuous polling RX the
unit polls multiple locations one after another
in a loop until the STOP key is pressed. OFF
54 Priority Copy Enables (ON) or disables (OFF) continuing
local copy when an incoming call arrives. OFF
ON: The incoming call is held until copying is
complete. If the call is continued after the end
of copy reception starts.
OFF: The copy is stopped when incoming call
arrives and automatic restart of copy is not
allowed.
55 Select Language Selects the language for operator panel and
print messages. Settings: English German
Dutch Italian French Swedish Norwegian
Danish ENGLISH
56 Select Voice Message Selects the language of the voice message
which responds to the calling station's
operator in TEL/FAX switching mode.
Settings: English German Dutch Italian
French Swedish Norwegian Danish
American or OFF American
57 Modem Attenuator Adjusts the attenuation (dB) for the message
send signal power level. The maximum send
signal power level (dB) of the fax is 0 dB.
Settings: 0 to 15 dB (in 0.5 dB increments).
NOTE: The send signal power level must
meet your country's regulations. Some
countries may specify the input power level at
a telephone exchange. In that case subtract
the specified level from the line cable
attenuation to determine the send level of your
fax. 11 dB