Adjustment
4 - 2
OL600e/610e/610e-PS/610e-S
Service Manual, P/N 59271602
4.1.3
Engine Maintenance Menu—OL610e/PS
Note:
Only service personnel should use this mode; it should not be released to end-users.
To enter the engine maintenance menu, turn the printer on while holding down the FORM FEED and
ENTER buttons.
Functions:
•
Head drive time setting
•
Drum count total display
•
Printing start position setting
•
Engine reset
•
Drum count display
•
Factory adjustment
Note:
"Printing start position setting" is for shipping. Do not change its default value.
Detailed descriptions of these functions are provided in Appendix C, Software Diagnostics &
Adjustments.
4.1.4.
DOS Operator Panel—OL600e, OL610e
Settings Tab
At the DOS Prompt, enter OL600, then click on Settings.
Functions:
•
Reset EEPROM, Menu, Drum count
•
Print position adjust
Detailed descriptions of these functions are provided in Appendix C.
Service Tab
Note:
Only service personnel should use this mode; it should not be released to end-users.
At the DOS Prompt, enter OL600 \S , then click on Service.
Functions:
•
Head Drive Time
•
Revision information
•
Climate
•
Count information
•
Market Place
Detailed descriptions of these functions are provided in Appendix C.