Oki ES9455, Software Setup Manual

Page: 82 / 386

5 [Registration] Tab Page
80 [Registration] Tab Page Overview
y You must specify either the [First Name] or [Last Name] box and either the [Email Address] or [Fax Number] box to
register the contact.
y If you enter “-” in the [Fax Number] and [2nd Fax Number], a three-second pause is added for dialing the fax
number.
y To perform fax transmission, the Fax Unit is required. If the Fax Unit is not installed, you cannot perform the fax
transmission even if you specify the fax number.
‰ [Fax Setting] screen
12 Department Enter the department name of the contact. You can enter up to 64 characters. Invalid
characters are replaced with "!".
13 Keyword Enter the comments on the contact. You can enter up to 256 characters. Invalid characters
are replaced with "!".
Item name Description
1
2
3
4
5
6
7
8
9
10
Item name Description
1 [Save] button Saves the entered information.
2 [Reset] button Restores fax settings set for the contact to the default status.
3 SUB Enter the mailbox number if you want to send a fax to the contact's fax mailbox. You can
enter up to 20 characters using numbers, #, and *.
4 SID Enter the password to send a fax to the contact's fax mailbox. You can enter up to 20
characters using numbers, #, and *.
5 SEP Enter the mailbox number if you want to retrieve a document from the contact's fax mailbox.
You can enter up to 20 characters using numbers, #, and *.
6 PWD Enter the password to retrieve a document from the contact's fax mailbox. You can enter up
to 20 characters using numbers, #, and *.
7 ECM Select whether to enable or disable ECM (Error Correction Mode). If [ON] is selected, it
facilitates error free communications by automatically resending any portion of the
document affected by phone line noise or distortion.
8 Line Select Select whether specifying the line to be used. If this is set to [Auto], this equipment
automatically selects the line to be used. However, [Line 2] can be applicable only when the
2nd Line for Fax Unit is installed.
9 Quality Transmit Select whether to send a document in the Quality TX mode. If [ON] is selected, this
equipment sends documents at a slower speed than normal so that the transmission will be
less affected by line condition.
10 Transmission Type Select whether the document will be sent in [Memory Transmit] mode or [Direct Transmit]
mode.