Oki ES9455, Software Setup Manual

Page: 166 / 386

8 [Administration] Tab Page
164 [Setup] Item List
5 POP Before SMTP Select whether the POP Before SMTP authentication is enabled or disabled. [Disable] is set
as the default.
6 Authentication Select the type of authentication to access the SMTP server.
y Disable — Select this to access the SMTP server using no authentication.
y Plain — Select this to access the SMTP server using plain authentication.
y Login — Select this to access the SMTP server using the log-in authentication.
y CRAM-MD5 — Select this to access the SMTP server using CRAM-MD5
authentication.
y Digest-MD5 — Select this to access the SMTP server using Digest-MD5 authentication.
y Kerberos — Select this to access the SMTP server using Kerberos authentication.
y NTLM(IWA) — Select this to access the SMTP server using NTLM (IWA) authentication.
y AUTO — Select this to access the SMTP server using the appropriate authentication
that this equipment detects.
7 Login Name Enter the log-in name to access the SMTP server if the SMTP authentication is enabled.
You can enter up to 64 alphanumerical characters and symbols other than =, ; (semicolon),
#, and \ (backslash).
8 Password Enter the password to access the SMTP server if the SMTP authentication is enabled. You
can enter up to 64 alphanumerical characters and symbols other than =, ; (semicolon), #,
and \ (backslash).
9 Maximum Email / InternetFax Size Select the maximum size that this equipment is allowed to send using the SMTP. Specify
within the range from 2 to 100 MB.
10 Port Number Enter the port number for accessing the SMTP server when [Enable SMTP Client] is
enabled. The port number depends on the port setting in the SMTP server. You can enter a
value in the range from 1 to 65535. Generally the default value "25" is used.
When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting is
enabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you set it by mistake, use the control panel of
the equipment to change the HTTP setting and enter the correct port number.
11 SMTP Client Connection
Timeout(1-180) Enter a timeout period for quitting communication when no response is received from the
SMTP server. Specify within the range from 1 to 180 seconds. “30” is set as the default.
Item name Description