5 [Registration] Tab Page
72 [Registration] Tab Page Overview
4
Destination — Remote 1
Select this check box to save the scanned file to a network folder. How you can set this item
depends on how the user with administrator privileges configured Remote 1 in the [Save as
file] submenu under the [Setup] menu.
When you select [Allow the following network folder to be used as a destination], you can
only select [Use Administrator Setting]. The protocol and the network path are displayed
below this item.
When you select [Allow user to select network folder to be used as a destination], you can
select [Use User Setting] and enter the following items to specify where to save the file.
If you are allowed to specify a network folder, select [Use User Setting] and enter the
following items to specify where to save the file.
Protocol
Select the protocol to be used for uploading a scanned file to the network folder.
y
SMB
— Select this to send a scanned file to the network folder using the SMB protocol.
y
FTP
— Select this to send a scanned file to the FTP server.
y
FTPS
— Select this to send a scanned file to the FTP server using FTP over SSL.
y
NetWare IPX/SPX
— Select this to send a scanned file to the NetWare file server using
the IPX/SPX protocol.
y
NetWare TCP/IP
— Select this to send a scanned file to the NetWare file server using
the TCP/IP protocol.
Server Name
When you select [FTP] as the protocol, enter the FTP server name or IP address where a
scanned file will be sent. For example, to send a scanned file to the “ftp://192.168.1.1/user/
scanned” FTP folder in the FTP server, enter “192.168.1.1” in this box.
When you select [NetWare IPX/SPX] as the protocol, enter the NetWare file server name or
Tree/Context name (when NDS is available).
When you select [NetWare TCP/IP] as the protocol, enter the IP address of the NetWare file
server. You can enter up to 64 alphanumerical characters and symbols.
Port Number(Command)
Enter the port number to be used for controls if you select [FTP] as the protocol. Generally “-
” is entered for the control port. When “-” is entered, the default port number, that is set for
FTP Client by an administrator, will be used. If you do not know the default port number for
FTP Client, ask your administrator and change this option if you want to use another port
number. You can enter a value in the range from 0 to 65535 using numbers and hyphens (-).
Hyphen (-) is set as the default.
Network Path
When you select [SMB] as the protocol, enter the network path to the network folder. For
example, to specify the “users\scanned” folder in the computer named “Client01”, enter
“\\Client01\users\scanned\”.
When you select [FTP] as the protocol, enter the directory in the specified FTP server. For
example, to specify the “ftp://192.168.1.1/user/scanned” FTP folder in the FTP server, enter
“user/scanned”.
When you select “NetWare IPX/SPX” or “NetWare TCP/IP” as the protocol, enter the folder
path in the NetWare file server. For example, to specify the “sys\scan” folder in the NetWare
file server, enter “\sys\scan”.
You can enter up to 128 alphanumerical characters and symbols.
Login User Name
Enter the login user name to access an SMB server, FTP server, or NetWare file server, if
required. When you select [FTP] as the protocol, an anonymous log in is assumed if you
leave this box blank. You can enter up to 32 alphanumerical characters and symbols.
Password
Enter the password to access an SMB server, FTP server, or NetWare file server, if required.
You can enter up to 32 alphanumerical characters, symbols, and spaces. A single space
only can also be entered.
Retype Password
Enter the same password again for a confirmation.
When the hard disk is not installed or when [Meta Scan] is selected, you can only specify one destination.
5
Destination — Remote 2
Select this check box to save the scanned file to a network folder. How you can set this item
depends on how the user with administrator privileges configured Remote 2 in the [Save as
file] submenu under the [Setup] menu.
If the user with administrator privileges specified Remote 2 to use only the specified network
folder, you can only select [Use Administrator Setting]. The protocol and the network path
are displayed below this item.
If the Remote 2 allows you to specify a network folder, you can specify the network folder
settings. See the description of the Remote 1 option for each item.
When the hard disk is not installed or when [Meta Scan] is selected, you can only specify one destination.
Item name
Description
Summary of Contents for ES9455
