Oki ES9455, Software Setup Manual

Page: 177 / 386

8.[Administration] Tab Page
[Setup] Item List 175
8 [Administration] Tab Page
y The protocol selecting list of the Wake Up setting is made to select the desired protocols regardless of whether the
selected protocol is enabled or disabled on each protocol setting. If the selected protocol is disabled on its protocol
setting, however, the Wake Up setting is disabled either and therefore this equipment will not be recovered from the
Super Sleep mode.
y When no response is returned from this equipment after you access the network even if a protocol selected on this
setting is used, retry the access.
If any of the following protocols is selected, this equipment can be recovered from the Super Sleep mode even if the
Wake Up setting is not set.
-
IPP
- FTP
- HTTP
- SMTP
- RAW9100
- LPD
- WebService
Item name Description
1 Protocol Select protocols to be used for recovering this equipment from the Super Sleep mode. Up to
4 protocols can be selected.
y ARP
Select this to enable address resolution when this equipment is used under IPv4
environment.
y SNMP for IPv4
Select this to search this equipment over the network with SNMP protocol when Client
Utilities is used under IPv4 environment.
y SNMP for IPv6
Select this to search this equipment over the network with SNMP protocol when Client
Utilities is used under IPv6 environment.
y SMB
Select this to enable domain name resolution when NetBIOS name is used under IPv4
environment.
y Bonjour
Select this to search this equipment over the network with Bonjour protocol.
y Neighbor Discovery(Link Local Address)
Select this to enable address resolution when this equipment is used under IPv6
environment.
y Neighbor Discovery(Manual)
Select this to enable address resolution when this equipment is used under IPv6
environment.
y LLMNR
Select this to enable domain name resolution when NetBIOS name is used under IPv6
environment.
y LLTD
Select this to search this equipment over the network with Nmap display when Network
Mapper is used.
y SLP
Select this to enable service discovery when SLP is used.
y Web Services for IPv4
Select this to search this equipment over the network with WS-Discovery under IPv4
environment.
y Web Services for IPv6
Select this to search this equipment over the network with WS-Discovery under IPv6
environment.