Oki ES9455, Software Setup Manual

Page: 255 / 386

8.[Administration] Tab Page
[Setup] How to Set and How to Operate 253
8 [Administration] Tab Page
„
Setting up Print Data Converter settings
For information on Print Data Converter, contact your service technician.
You can configure Print Data Converter from the [Print Data Converter] submenu under the [Setup] menu.
Some settings may not be reflected on the touch panel immediately after changing them. The settings will be updated
by pressing the [RESET] button on the control panel or after an Auto Clear time period.
Setting the Print Data Converter settings
1
Start TopAccess access policy mode.
P.22 “Access Policy Mode”
2
Click the [Administration] tab.
3
Click the [Setup] menu and [Print Data Converter] submenu.
The Print Data Converter submenu page is displayed.
4
In the Print Data Converter submenu page, set the Print Data Converter settings as
required.
You can set the following in this page.
P.215 “Print Data Converter settings”
5
Click [Save].
The confirmation dialog box appears.
When you click [Cancel] before saving the setting changes, they will not be saved and will return to the current
settings. Note that they will not be returned to the factory default by clicking [Cancel]. This can only clear the
changes and restore the current settings before saving the changes.