Oki CX4545 MFP Troubleshooting Manual Download Page 56

Page: 56 / 120

1 TROUBLESHOOTING FOR THE HARDWARE

54 Replacing the Waste Toner Box

Replacing the Waste Toner Box

When the waste toner box becomes full, the symbol for replacement of the waste toner box blinks and the message
“Dispose of used toner” appears. Replace the waste toner box following the procedure below.

Never attempt to incinerate waste toner boxes.

Dispose of used toner cartridges and waste toner boxes in accordance with local regulations.

Open the waste toner box cover.

Pull out the waste toner box until you can see its
opening.

Put the cap on the opening of the waste toner box.

1) Loosen and take off the cap on the front top of the waste toner box.
2) Put the cap firmly on the opening of the waste toner box.

Take out the waste toner box.

Never attempt to incinerate waste toner boxes.

Dispose of used toner cartridges and waste toner boxes in
accordance with local regulations.

Summary of Contents for CX4545 MFP
























































































































Search results

Summary of Contents for CX4545 MFP

Reviews:

Related manuals for CX4545 MFP

Brands by name

Popular brands

Oki CX4545 MFP, Troubleshooting Manual

Search results

Summary of Contents for CX4545 MFP

Reviews:

Related manuals for CX4545 MFP

Brands by name

Popular brands