Oki CX4545 MFP, Troubleshooting Manual

Page: 58 / 120

1 TROUBLESHOOTING FOR THE HARDWARE
56 Refilling With Staples
Refilling With Staples
Refill with staples according to the following procedures when the staples in the stapler of the finisher and Saddle Stitch
unit run out.
 P.56 “Refilling Finisher staples”
 P.59 “Refilling Saddle Stitch unit staples (MJ-1106)”

Refilling Finisher staples
 Finisher MJ-1101 / MJ-1106
1
Open the front cover of the finisher.
An illustration of MJ-1101 is given in the right-hand figure.
2
Remove the staple cartridge.
3
Take the empty staple case out of the staple cartridge.
Pull up the empty staple case while pushing both sides as shown in the
figure.
4
Fit a new staple case on the staple cartridge.
Push the staple case hook into the staple cartridge socket until you
hear a click.