43856301TH Rev.3
76 /
Oki Data CONFIDENTIAL
4. Component replacement
4.2.19 Feeder unit/ Board-RSF/MPT hopping roller/
Frame Assy separator/ Cover front
(1) Open the top cover.
(2) Remove the plate shield and remove the connector. (See section 4.2.8)
(3) Disengage the claws of stay L and stay R , slide the feeder unit to right
and remove it.
(4) Remove the motor cover. (See section 4.2.15)
(5) Disengage the claw, and remove the cover sensor .
(6) Remove the connector and remove the Board-RSF .
(7) Remove the MPT Assy. (See section 4.2.18)
(8) Rotate until the claw of lever is disengaged, and remove it.
(9) Remove the two screws (Black), and remove the stay L .
(10) Remove the four screws (Black), disengage the claw B (2 places), and
remove the feeder Assy .
(11) Remove the two lock shafts and two springs , and disengage the claws (4
places) and remove the guide Assy .
(12) Remove the hopping roller shaft .
(13) Remove the supporters (2 places), and remove the frame Assy separator and
spring .
Claw
