43856301TH Rev.3
136 /
Oki Data CONFIDENTIAL
7. Troubleshooting and repair procedure
Panel display
(The mark indicates no
message in the upper row.)
ON
LINE
lamp
Inspection
lamp
Details
Remedial
measure
Feed paper.
Multipurpose tray
%MEDIA_SIZE%
Press the ON LINE
button.
On
Off
Indicates that the print request of
manual paper feed is issued.
Prompt user to feed manually
the paper that is indicated by
%MEDIA_SIZE%.
Unit of paper size in the Custom
mode follows the unit specified
display unit (menu setting) of the MP
tray unless otherwise specified by
driver.
If unit of paper size is specified
by driver, it is displayed in units
specified by driver.
Paper size in the Custom mode is
displayed as "<width> x <length>
<unit>"
ex: 210 x 297 mm
8.5 x 11.0 inch
Press the ON
LINE switch.
* The data will
be deleted
unless the ON
LINE switch is
pressed within
the time set
by [Manual
Timeout].
If a printer detects an un-recoverable error, the following service call error is displayed on
the LCD.
Service call
nnn: error
Note!
nnn indicates an error code.
When a service call is displayed, the error code and the associated error information are
displayed in the lower row of the LCD display at the same time.
Be sure to take note of this error information (numerals indicating address and others)
and inform it to the related departments because the information is used for trouble
analysis and solution. Meaning of error codes and remedial measures are shown in
Tables 7-1-1 and 7-1-2.
Table 7-1-1 Operator alarm
Display on operator panel
ON
LINE
lamp
Inspection
lamp
Contents
Code nnn
Change paper of the
%TRAY%
Insert the
%MEDIA_SIZE%
%MEDIA_TYPE% and
press the ON LINE switch.
For details, see on-line
help.
Off
Blink
Indicates unmatch between the
media type in the tray and the print
data occurs.
Prompt user to insert paper in the
tray.
Error 661: Tray 1
Error 662: Tray 2
Error 461: Tray 1
Error 462: Tray 2
Unit of paper size in the Custom
mode follows the unit specified
display unit (menu setting) of the MP
tray unless otherwise specified by
driver.
If unit of paper size is specified by
driver, it is displayed in units specified
by driver.
Paper size in the Custom mode is
indicated as follows:
"<Width> x <Length> <unit>"
ex : 210 x 297 mm
8.5 x 11.0 inch
User is requested to change paper of
the tray and press the ON LINE key.
Error
461
462