Oki C5150n User Manual Download Page 97

Page: 97 / 163

Troubleshooting

•

CHECK BELT
330: BELT MISSING

The belt unit is not
properly installed.

Open the top cover and
lift out the black (K) and
Yellow (Y) image
drums, placing them on
a

flat

surface. Check to

be sure that the belt
unit latches are fully in
the latched position:

then reinstall the image
drums.

CHECK FUSER
320: FUSER MISSING

The fuser unit is not
properly installed.

Open the top cover and
check to be sure that
the fuser unit is
properly seated in the
printer and that the lock
levers are pushed all
the way toward the
back of the printer:

CHECK MP TRAY
390: PAPER :JAM

Paper has jammed
while exiting the MP
Tray.

Clear the jam: see
“Jam 390” on page 94.

Message

Meaning

What to Do

Summary of Contents for C5150n




































































































































































Search results

Summary of Contents for C5150n

Reviews:

Related manuals for C5150n

Brands by name

Popular brands

Oki C5150n, User Manual

Search results

Summary of Contents for C5150n

Reviews:

Related manuals for C5150n

Brands by name

Popular brands