Oki C5150n User Manual Download Page 103

Page: 103 / 163

Troubleshooting

•

103

Cannot print.

•

PRNUSBX WRITE ERROR

is displayed.

Possible cause

Remedy

Interface is disabled.

In the printer menu settings, enable the USB
interface (

USB MENU

→

USB

→

ENABLE

Printer is switched
OFF.

Turn on the printer.

Printer interface
cable is
disconnected.

Reconnect the printer interface cable.

A converter, buffer,
extension cable or
USB hub is being
used.

Test by connecting the printer and computer
directly.

Printer driver output
port is incorrect.

Set correct output port to which the printer
interface cable is connected.

Printer is not selected
in the printer driver.

Select the printer or set to default printer.

Incorrect printer
driver is being used.

Delete this printer driver and install correct printer
driver from the Drivers CD supplied with your
printer.

Summary of Contents for C5150n




































































































































































Search results

Summary of Contents for C5150n

Reviews:

Related manuals for C5150n

Brands by name

Popular brands

Oki C5150n, User Manual

Search results

Summary of Contents for C5150n

Reviews:

Related manuals for C5150n

Brands by name

Popular brands