Oki C5150n User Manual Download Page 102

Page: 102 / 163

Troubleshooting

•

102

Problems Printing

Cannot configure for USB connection.

NOTE

Windows NT 4.0 does not support USB. Windows 98
upgraded from Windows 95 may not support USB.

Possible cause

Remedy

USB cable does not meet
specifications.

Use USB cable to specification Ver.1.1.

Interface is disabled.

Check that USB interface is set to Enable in the
menu (

USB MENU

→

USB

→

ENABLE

Configuration procedure
was not correctly
followed or cancelled.

Configure again from the beginning.

USB cable is
disconnected or faulty.

Reconnect or try another cable.

A USB hub is being used. The printer cannot be used with a USB hub.

Connect the printer and computer directly.

The USB cable is
installed in the Ethernet
port.

Make sure the USB cable is plugged into the
black USB port (

) on the printer:

Summary of Contents for C5150n




































































































































































Search results

Summary of Contents for C5150n

Reviews:

Related manuals for C5150n

Brands by name

Popular brands

Oki C5150n, User Manual

Search results

Summary of Contents for C5150n

Reviews:

Related manuals for C5150n

Brands by name

Popular brands