manualshive.com logo in svg

Oki B4200, User Manual, Page: 96 / 226

Share
Download
Oki B4200 User Manual Download Page 96

IV - 14

Section 4 - Chapter 3 - TCP/IP Configuration and Printing

OKI OkiLAN 6020e User’s Guide

Chapter 3
TCP/IP Configuration and
Printing

Overview

The OkiLAN 6020e supports printing from computers
using TCP/IP and any of the following printing
protocols:

• Line Printer Redirect/Line Printer Daemon (lpr/lpd)
• File Transfer Protocol (FTP)
• Printing directly through a TCP port (Raw Port

Printing)

This chapter presents basic instructions on how to
configure your computer to print using Remote LPD
and FTP. Specific instructions for several popular
computer systems have been documented in Appendix
B, 

Application Considerations

. If your specific system

is not addressed in this appendix, follow the
instructions outlined below. You should also refer to
your operating system or computer manual for
information about configuring remote network printing.
If you are still unable to configure your computer
system to print to the OkiLAN 6020e, contact Oki Data
Customer Support at 1-800-OKI-DATA
(1-800-654-3282).

Summary of Contents for B4200



































































































































































































































Reviews:

No comments