Oki B4200 User Manual Download Page 137

Page: 137 / 226

IV - 55

Section 4 - Appendix A - Troubleshooting

OKI OkiLAN 6020e User’s Guide

TCP/IP

• If the

ftp

succeeds, there is a problem with the

lpr/

setup. Verify the hostname or IP address is

correctly set for the queue. Try doing an

lpstat

(System V) or

lpq

(BSD) to query the status of the

OkiLAN 6020e.

FTP

• If the indicator blinks green, the printer is

receiving data. If nothing is actually printing,
check the printer settings. For example, if you are
using a PostScript printer, verify the OkiLAN
6020e is set to PostScript also.

• Try

pinging

the device by its IP address (not the

hostname). This will verify the OkiLAN 6020e is
functioning on the network.

• If you cannot connect over ftp but the

ping

succeeds, try

telneting

to the OkiLAN 6020e and

print a configuration page to verify settings. If
that fails, you might have a TCP/IP configuration
problem with the OkiLAN 6020e.

Summary of Contents for B4200



































































































































































































































Search results

Summary of Contents for B4200

Reviews:

Oki B4200, User Manual, Page: 137 / 226

Search results

Summary of Contents for B4200

Reviews: