Oki B4200, User Manual, Page: 157 / 226

IV - 75
Section 4 - Appendix B - Application Considerations
OKI OkiLAN 6020e User’s Guide
TCP/IP
IBM’s AIX ver. 3.x for Printing with the
OkiLAN 6020e
This application note describes the configuration of the
printing system on IBM’s AIX version 3.x of the UNIX
operating system. The following specific names will be
used to represent general devices or concepts.
• lj4 - The local queue name on the AIX system to
which print jobs that are destined for a printer
attached to the OkiLAN 6020e will be directed.
• OKIPRINTER - The host name of the remote
system which is the OkiLAN 6020e. For example,
to telnet to the OkiLAN 6020e and invoke the
OkiLAN 6020e Configuration utility, you would
type
telnet OKIPRINTER . A host name is not
required for the OkiLAN 6020e, the IP Address
may be used.
• yourqueuename - This is the name of the queue
on the OkiLAN 6020e and must end with 1 or 2,
depending on the port selected to service the print
jobs.
If FF, LF or NF are the last two letters of the
queue name, the job will be converted
accordingly. See pages IV-15 and IV-16 for more
information on remote queue names.
Prerequisites
Before you proceed, the name OKIPRINTER and the
IP address assigned to the OkiLAN 6020e should be in
the “/etc/hosts” file on the AIX system.
Procedure
To configure the AIX machine so that users can spool
print jobs to the pcl2 print queue on the OkiLAN 6020e
named OKIPRINTER, do the following:
1. Login to the AIX machine as root.
2. Invoke the SMIT utility by typing:
AIX> smit <enter>