Oki B4200, User Manual, Page: 204 / 226

VII - 6
Section 7 - Chapter 1 - OkiLAN 6020e Setup for Windows NT
OKI OkiLAN 6020e User’s Guide
Notify When Printed
This feature will provide an alert when your job is
active on the printer. This may be useful if the printer is
especially busy.
Description
An optional field where you may list the location or
other useful information about the printer port.
OkiLAN 6020e Connect for DLC
OkiLAN 6020e Connect for Data-Link Control (DLC)
provides a direct printing solution for users in
Microsoft Windows NT serverless environments with
the DLC/LLC protocol. Print jobs printed through
OkiLAN 6020e Connect are sent directly to the
OkiLAN 6020e print server and not routed through the
network server, resulting in a reduction of network
traffic. OkiLAN 6020e Connect for DLC can be used to
configure the print server, obtain status from the print
server and printer, and send jobs to the printer.
Note: To obtain a version of OkiLAN 6020e Connect
for DLC that supports Windows NT, visit our
FTP site (ftp://ftp.extendsys.com/pub/
printserver/utilities/) or contact Technical
Support.
Configure Port
If you have printing problems while using the OkiLAN
6020e Connect printing port, you may check the status
of the port by selecting
Configure Port under the Ports
tab in the Properties screen.
Notify On Printer Error
This feature will check the printer status prior to
printing the job. If a printer error is detected (e.g.
printer off-line or out of paper) the error description
will be given.