manualshive.com logo in svg

Oki B4200, User Manual, Page: 208 / 226

Share
Download
Oki B4200 User Manual Download Page 208

VII - 10

Section 7 - Chapter 2 - OkiLAN 6020e Setup for Windows 95/98

OKI OkiLAN 6020e User’s Guide

Chapter 2
OkiLAN 6020e Set Up for
Windows 95/98

Overview

This section contains instruction and information on
how to set up your OkiLAN 6020e for a Windows 95/
98 environment. Print options for Windows 95/98
include:

• OkiLAN 6020e Connect for TCP/IP
• OkiLAN 6020e Connect for DLC
• OkiLAN 6020e Connect for IPX/SPX

OkiLAN 6020e Connect for TCP/IP

OkiLAN 6020e Connect for TCP/IP is a full featured
utility that allows simple, direct, TCP/IP printing from
your computer to a printer attached to an OKI TCP/IP
enabled print server. With OkiLAN 6020e Connect,
you can even print to print servers using Dynamic IP
addresses (DHCP). Print jobs printed through OkiLAN
6020e Connect are sent directly to the OkiLAN 6020e
print server and not routed through the network server,
resulting in a reduction of network traffic.

System Requirements

To use OkiLAN 6020e Connect for TCP/IP, your
operating system must be Windows 95/98 and your
computer must be configured to run TCP/IP. The
OkiLAN 6020e print server must also be configured to
run TCP/IP.

Installation

To install OkiLAN 6020e Connect for TCP/IP:

1. Install the OkiLAN 6020e Connect for TCP/IP-see

Section I.

2. When installation is complete, click on 

Start

,

Settings 

and then 

Printers

.

Summary of Contents for B4200



































































































































































































































Reviews:

No comments