Oki B4200, User Manual, Page: 102 / 226

IV - 20
Section 4 - Chapter 3 - TCP/IP Configuration and Printing
OKI OkiLAN 6020e User’s Guide
TYPE Changes the representation type used
for data transfer. Image (or binary) and
ASCII are the only types supported.
ASCII Equivalent to “TYPE ASCII.”
BINARY Equivalent to “TYPE BINARY.”
IMAGE Equivalent to “TYPE IMAGE.”
STRU Specifies file structure. File is the only
structure supported.
MODE Specifies transfer mode. Stream is the
only transfer mode supported.
OPEN Opens connection to remote host.
CLOSE Terminates FTP session.
QUIT Terminates FTP session and exits FTP.
BYE Equivalent to QUIT .
With the exception of the OkiLAN 6020e 100 series,
OkiLAN 6020e print servers will allow one FTP
connection. If more FTP connections are attempted, the
OkiLAN 6020e will reject the connection until one of
the other FTP connections is closed. When an FTP
connection is rejected, the FTP program will typically
display a message like the following:
$ ftp<CR>
ftp> open OkiLAN 6020e_name<CR>
connection refused
ftp>
Note: Specifying binary mode is important for all
jobs. Most FTP implementations default to
ASCII mode. This may cause unexpected or
undesired printing results.