manualshive.com logo in svg

Oki B4200, User Manual, Page: 169 / 226

Share
Download
Oki B4200 User Manual Download Page 169

V - 5

Section 5 - Chapter 2 - Installation

OKI OkiLAN 6020e User’s Guide

LAN Manager/ Server

Chapter 2

Installation

Overview

To install the OkiLAN 6020e:

1. Install the OkiNet for OS/2 utilities software.

2. Run the OkiNet for OS/2 utility to add a local printer

port.

3. Associate a print queue with the new local printer

port.

Once the installation is complete, you can verify
communication by printing a configuration sheet.

Network Preparation

• You must have network administrator privileges to

install the OkiLAN 6020e.

• You must have physical access to an OS/2 file server

to host the OKI software utilities.

• Write down the serial number and the Ethernet

address of your OkiLAN 6020e.

• OS/2 and LAN Manager/LAN Server must be

configured with the following protocol:

DLC/802.2 protocol stack

• LAN Manager users must enable the remote boot

facility.

• LAN Server 2.X users must run the LAN Server

installation utility and select the 802.2 protocol.

• LAN Server 3.0 users must run the LAPS utility and

select the 802.2 protocol.

• OS/2 Warp Users must run the MPTS utility and

select the 80w.w protocol. See your network
administrator or the LAN Manager/LAN Server
manuals for instructions.

Summary of Contents for B4200



































































































































































































































Reviews:

No comments