Oki B4200 User Manual Download Page 20

Page: 20 / 226

I - 10

Section I - Hardware Installation

OKI OkiLAN 6020e User’s Guide

Installing the OkiLAN Utilities
Software in Windows

1. Insert the OkiLAN CD into your CD-ROM drive.
2. The Setup screen appears automatically (if it doesn’t,

click Start

Run, then enter D:\setup, if “D” is your

CD-ROM drive).

3. Select the utility group for the network environment

you have, then click Next.

4. Select the specific utility you want to install and the

proper location for installation, then click Install.

Windows Utility Groups:

NetWare Management Utilities

OkiNet Utility for NetWare
OkiNet Utility for NDS (Workstation and Server)
OkiNet Utility for NDS (Workstation)

OkiNet Connect Windows Printing

OkiNet Connect for TCP/IP (Windows 95/98)
OkiNet Connect for TCP/IP (Windows NT)
OkiNet Connect for IPX/SPX (Windows 95/98)
OkiNet Connect for IPX/SPX Windows NT)
OkiNet Connect DLC (Windows 95/98)
OkiNet Connect DLC (Windows NT)

TCP/IP Management Utilities

OkiNet Utilities for TCP/IP
OkiNet Alert for TCP/IP
Okidata MIB
BootP Server

Summary of Contents for B4200



































































































































































































































Search results

Summary of Contents for B4200

Reviews:

Oki B4200, User Manual, Page: 20 / 226

Search results

Summary of Contents for B4200

Reviews: