manualshive.com logo in svg

Oki B4200, User Manual, Page: 32 / 226

Share
Download
Oki B4200 User Manual Download Page 32

II - 8

Section 2 - Chapter 3 - HP Web JetAdmin Support

OKI OkiLAN 6020e User’s Guide

Chapter 3
HP Web JetAdmin Support

Overview

This section contains instructions and information on
how to configure, install, and obtain diagnostic
information from your OkiLAN 6020e using the
Hewlett-Packard Web JetAdmin software.

Software Requirements

• Web JetAdmin 1.x, 2.x, 3.x, or 4.x

Note: For more information on installing and using

HP Web JetAdmin, refer to the HP Web
JetAdmin documentation.

Configuring the OkiLAN 6020e Using
Web JetAdmin

1. From the main Web JetAdmin page, select the

OkiLAN 6020e port you wish to configure.

2. On the Properties page, click the Config button.

3. Make any necessary changes to the options listed

and click the corresponding Apply button.

Installing a Windows NT Printer for
the OkiLAN 6020e

1. From the main Web JetAdmin page, select the

OkiLAN 6020e port you wish to install.

2. On the Properties page, click the Install Printer

button.

3. In the Specify the device address… field, enter the

print server IP address, followed by a comma and
then the output port number. For example, to install a
printer for output port 2 of an OkiLAN 6020e with
an IP address of 10.10.10.2, enter “10.10.10.2,2”.

Summary of Contents for B4200



































































































































































































































Reviews:

No comments