Oki B4200, User Manual, Page: 56 / 226

III - 12
Section 3 - Chapter 2 - OkiNet for NetWare
OKI OkiLAN 6020e User’s Guide
• PostScript - Inserts the appropriate character string
in front of each print job to switch the printer to the
PostScript printer language.
• Automatic - Enables the auto language sensing
function. This function examines the print job data
stream and determines the required print language
and inserts the appropriate character string in front
of each print job to switch the printer to the
appropriate printer language.
Note : If you are not switching languages or the
printer can switch languages automatically, this
option should be set to
OFF .
Printer Type
The Printer Type selection is used to determine the
actual character string required for your printer. If your
printer type is not listed, select
Other and enter the
character string for switching the printer to PCL or
PostScript mode.
To enter nonprintable characters, enclose the ASCII
value of the character in angle brackets. For example,
to enter the ESC character type:
<27> .
PCL Switch Sequence
Enter the character string to switch the printer to the
PCL print language.
PostScript Switch Sequence
Enter the character string to switch the printer to the
PostScript print language.
Configuration Page Language
Select the appropriate printer language for printing
configuration pages on your printer.
Note : Do not set the Configuration Page Language to
OFF for all ports of your OkiLAN 6020e. If a
configuration sheet cannot be printed,
troubleshooting abilities are limited.