CHAPTER 3 MAINTENANCE PROCEDURES
Adven
turer ™ Balances Service Manual 35 Ohaus Corporation www.ohaus.com
Figure 3-40 Main PCBA removed from bottom housing.
3.5
Replacing Adventurer Communication PCBA.
1.
Locate the communication PCBA from the back of the housing and remove the cable
connecting from the communication PCBA to the main PCBA after that remove the two
screws holding the communication PCBA to the balance bottom housing.
Figure 3-41 Location of the two screws holding the communication PCBA and the cable
linking from the communication cable to main PCBA.
2.
Remove the communication PCBA and place in a secure place.
Figure 3-42 Communication PCBA removed.
