OEG 650 001 128 Installation And Operating Instructions Manual Download Page 43 | Manualshive

Page: 43 / 204

background image

43

Inverter swimming pool heat pump

GB

Important information

The instructions and recommendations contained in this manual should be read carefully and understood since they
provide valuable information concerning the safe handling and operation of the heat pump.

Keep this manual in an accessible place for easy future reference.

The installation must be carried out by a qualified professional person in accordance with current regulations and
manufacturer’s instructions. An improper installation may cause physical injury to persons or animals as well as
mechanical damage for which the manufacturer shall not be rendered liable under any circumstances.

After unpacking the heat pump, please check the contents for any damages.

Prior to connecting the heat pump, ensure that the actual installation conditions are compatible with the instructions
provided in this manual and that the maximum limit values authorised for this product are not exceeded.

In case of a defect and/or malfunction, the heat pump must be disconnected from the power supply. Under no
circumstances should any attempt be made to repair the fault yourself.

Repair may be performed only by an authorised technical service organization using original replacement parts.
Failure to comply with the afore-mentioned terms may have an adverse effect on the safe operation of the heat pump.

In order to guarantee an efficient and satisfactory operation of the heat pump, it is important to ensure its regular
maintenance in accordance with the instructions provided.

If the heat pump is sold or transferred to another user, always make sure that together with the equipment all technical
documentation is handed over to the new owner.

This heat pump is allowed to be used for heating a swimming pool only. Any other purpose must be considered as
being inappropriate, incorrect or even hazardous.

Any contractual or non-contractual liability of the manufacturer/distributor shall be deemed null and void for damages
caused by installation or operational errors, or due to non-compliance with the instructions provided in this manual or
with current installation regulations applicable to the equipment covered by this document.

«
...
41
42
43
44
45
...
»

Summary of Contents for 650 001 128













































































































































































































Reviews:

No comments

Related manuals for 650 001 128

Brand: Gabarron Pages: 8

Brand: Galmet Pages: 256

Brand: L.B. White Pages: 108

Brand: Larius Pages: 46

Brand: JEC Pages: 13

Brand: Raymarine Pages: 24

SunCentric Series

Brand: Dankoff Solar Pages: 11

Brand: BLACKMER Pages: 12

REMINGTON REM-16-TTC-O

Brand: Pinnacle Climate Technologies Pages: 32

Brand: True North Pages: 20

Brand: K&T Pages: 17

Brand: U.S. Products Pages: 8

Brand: Fairland Pioneer Pages: 36

Brand: SAER Elettropompe Pages: 44

Brand: Atlantic Pages: 20

Brand: KlimaTeknik Pages: 16

Brand: EDM Product Pages: 25

Brand: Carrier Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands